Beacon Button Press
No, it is not possible to use both the Beacon button and Beacon pairing method at the same time. An account can have only one active pairing type at the sam...
Wed, Nov 3, 2021 at 1:03 AM
As a fleet manager, you can review the button press, pairing, and unpairing events for your drivers on the Azuga Fleet web app under Live Maps and reports s...
Wed, Feb 16, 2022 at 10:46 PM
The Button on the beacon should be pressed after 30 seconds after the Ignition of the vehicle is turned on.
Wed, Nov 3, 2021 at 1:08 AM
Fleet managers can check if you have claimed the trip by pressing the button or not. The Fleet manager can review the button press, pairing, and unpairing e...
Wed, Feb 16, 2022 at 10:50 PM
The pairing depends on the setting done for your account. By default, if any other driver in the vehicle presses the button on the beacon added to the accou...
Wed, Nov 3, 2021 at 1:13 AM
The button on the beacon has to be pressed after 30 seconds after the ignition of the vehicle is turned on. If you forgot to press the button at the start o...
Wed, Nov 3, 2021 at 1:13 AM
The average battery life of the beacon card is 60 Months.
Wed, Nov 3, 2021 at 1:14 AM
If you forgot to press the button at the start of the trip and if the trip ended and the button was pressed, unfortunately, there would be no change and the...
Wed, Nov 3, 2021 at 1:15 AM
The Beacon card has an external push button at the center. Once the driver enters the vehicle and turns the ignition on, he/she needs to press the button on...
Wed, Mar 6, 2024 at 10:05 PM