How to Calibrate Accelerometer Sensor in AI SafetyCam (AI-12)?

To calibrate the Accelerometer Sensor:

1. Press the touchscreen of the camera to wake it up.
2. Enter your PIN to unlock the camera. (Default is 3333)
3. Press Settings.
4. Press Calibration.

The calibration process takes about a second and once completed, the status changes from Not Done to Done.

NOTE: 

• You can only calibrate cameras that are online.
• Before you start, make sure the vehicle is parked on a level surface, the ignition is off, and the camera is online. If you are in a hilly area, move the vehicle to as flat an area as you can.