General
Beacons are small sized cards that emit low energy Bluetooth radiations. These cards are used for occupant recognition, i.e., they help you identify occupan...
Sun, Mar 6, 2016 at 9:52 PM
Every beacon needs to be activated before it can be used. The black tape at the side of a beacon is the trigger to activate the beacon. You need to pull out...
Sun, Mar 6, 2016 at 9:57 PM
When a person (with a beacon) enters a vehicle, the OBD device captures the Bluetooth radiations emitted by the beacon. It then reports the details of...
Mon, Mar 7, 2016 at 11:09 PM
To associate a driver with a beacon:
1. Login to the Azuga Web application.
2. Navigate to the Devices page, under the Admin tab.
...
Mon, Jul 18, 2016 at 2:01 AM
As soon as the vehicle ignition is turned ON, driver will get paired with the vehicle on the very first ping from the device to the Azuga server (provided h...
Mon, Mar 7, 2016 at 10:50 PM
A driver gets unpaired if any of events below takes place:
At ignition OFF- Drivers get automatically unpaired when the vehicle ignition is turned OFF...
Mon, Mar 7, 2016 at 10:49 PM
The Azuga device can only detect up to 4 beacons at once. So if there are 5 occupants in a vehicle, it’ll only recognize 4 of them based on randomness.
Mon, Mar 7, 2016 at 10:14 PM
Azuga will identify all the occupants in your vehicle provided that each of them carries a beacon. The OBD device detects all the beacons and reports it to ...
Mon, Mar 7, 2016 at 10:30 PM
You can find information about the occupants in your fleet from :
1. Breadcrumb Report
2. Summary Report
...
Sun, Nov 20, 2016 at 11:15 PM
1. Login to the Azuga Web application.
2. Navigate to the Devices page, under the Admin tab.
3. Select Beacons.
...
Sun, Sep 18, 2016 at 10:11 PM